Rectifier bridge - Rectifier Kit T30
El T30 es un Kit de puente rectificador utilizado por los generadores Mecc Alte ECO/ECP 34/38. Incluye tres placas que contienen un diodo en configuración ánodo común y un diodo en configuración cátodo común, un varistor y el cableado listo para instalar con el resto de los componentes.
Rectifier kit T30 is an electrical component of the panel or control circuit: it conducts, switches, protects or signals inside the system.
In electrical work 90 % of faults sit in the joint, not in the part. A loose terminal, a bad crimp or chafed insulation produce intermittent faults that no new component will cure.
Specifications and compatibility
- Dimensions
- 15 x 6,5 x 15 cm
- Weight
- 2.00 kg
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- KIT RECTIFICADOR T18
- KIT RECTIFICADOR RSK1001
- KIT RECTIFICADOR RSK2001
- KIT RECTIFICADOR RSK5001
- KIT RECTIFICADOR RSK6001
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Su snippet dinámico se mostrará aquí...
Este mensaje se muestra ya que no brindó ni un filtro ni una plantilla para usar.
Specifications
| Characteristics | |
|---|---|
| Weight | 2,00 kg |
| Dimensions | 15 x 6,5 x 15 cm |
| Spare Parts | |
|---|---|
| Generator Parts | Rectifier kit |