Controller DSE103 is the genset control module: it runs start and stop, watches oil pressure, temperature and speed, and commands the transfer when mains fails.
Controllers fail three ways: moisture and creeping corrosion on the terminals, transients on the control supply, and display wear. Typical symptoms are intermittent starting, phantom low-oil alarms, or a screen that stops responding.
Specifications and compatibility
- Brand
- OEM
- Model
- DSE 103
- Dimensions
- 90 x 80 x 30 mm
- Weight
- 0.30 kg
How to verify before ordering
- The reference must match the installed module. Identical size does not mean identical wiring: input map and transfer logic change between versions.
- Confirm the supply voltage (12 V or 24 V) and the number of inputs and outputs your panel actually uses.
- If the panel has an expansion module or remote communication, check that the new controller supports the same protocol.
- The reference shown on this listing is DSE 103; cross-check it against the one stamped on the removed part.
Frequently asked questions
Can it be installed without reprogramming?
No. Every new controller needs configuration: rated voltage, frequency, crank and cooldown timers, and transfer logic. We ship the factory configuration; site parameters are set on commissioning.
Does the controller include the display?
Where module and screen are one piece, yes. If your panel uses a separate display, check the full reference before ordering, because they are sold separately.
Related parts
- CONTROLADOR DGC2020ES-5C2 BASLER
- CONTROLADOR HGM9510N
- CONTROLADOR 2445400358- 100044665 DEIF
- CONTROLADOR DC82D-MK2 MEBAY
- CONTROLADOR PARA MOTORES DE GAS GEC100B YSD
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Brand | OEM |
| Model | DSE 103 |
| Dimensions | 90 x 80 x 30 mm |
| Weight | 0,30 kg |