Skip to Content
  1. All Products
  2. All Products
  3. AVR - Automatic Voltage Regulator 10KW
USD $
AVR - Automatic Voltage Regulator 10KW

AVR - Automatic Voltage Regulator 10KW

https://www.nanwan.cc/web/image/product.template/3123/image_1920?unique=2ec92cf
(0 review)
Este AVR de 10KW está diseñado para mantener una salida de voltaje estable en tu generador, con una precisión de ajuste automático de ≤ ±1% gracias a su retroalimentación de voltaje negativo.Produce una salida de 230-240V CA a 50Hz. Incluye protección contra sobrevoltaje, sobrecorriente y cortocircuitos para mayor seguridad. Su instalación es sencilla gracias a sus enchufes de presión y sus orificios de montaje están a 142mm de distancia.

$ 35.16 35.16 USD Tax Excluded

35.16 Bs Tax Excluded

Not Available For Sale

  • Generator Parts
  • Applicable To
  • Weight
  • Dimensions

This combination does not exist.

Contact Us

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Share

Automatic Voltage Regulator (AVR) - AVR 10KW belongs to the generator excitation circuit and holds the output voltage within about ±1 % when the load steps up or down.

AVR wear is thermal. It works inside the generator compartment with no ventilation of its own, so it is usually the first module to age on a high-hour set. Keeping one on the shelf avoids a multi-day stop for a low-cost part.

Specifications and compatibility

Applicable to
UNIVERSAL
Dimensions
17 x 6 x 13 cm
Weight
1.00 kg

How to verify before ordering

  • Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
  • Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
  • Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.

Frequently asked questions

How do I know the fault is the AVR and not the generator?

Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.

Can the voltage be trimmed after installation?

Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Characteristics
Applicable To Universal
Weight 1,00 kg
Dimensions 17 x 6 x 13 cm
Spare Parts
Generator Parts AVR